Hall effect sensors

A new range of sensors based on closed loop hall effect technology, for measuring and monitoring of e.g. secondary transformer overload or shortcircuit detection, DC link from ground fault and overload, motor overload.

  • MSA100 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and track side applications. High currents are converted lineair to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA100 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can…
  • MSA1000 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA1000 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can handle…
  • MSA200 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA200 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can handle…
  • MSA2000 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA2000 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can handle…
  • MSA2010 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents and high voltages in rolling stock and track side applications. High voltages or currents are converted linearly to low power signals. The sensors are based on compensating the magnetic field by a closed loop system. The MSA2010 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the…
  • MSA300 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA300 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can handle…
  • MSA500 – Hall effect transducer

    The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSA500 is used for the measurement of AC and DC currents with high galvanic isolation between the current carrying conductor and output of the sensor. The current transducer can handle…
  • MSV100 – Hall effect transducer

    The Mors Smitt transducers are used to measure high voltages in rolling stock and trackside applications. High voltages are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSV100 is used for the measurement of AC and DC voltages with high galvanic isolation between the voltage carrying conductor and output of the sensor. The voltage transducer can handle…
  • MSV200 – Hall effect transducer

    The Mors Smitt transducers are used to measure high voltages in rolling stock and trackside applications. High voltages are converted linearly to low power signals. The transducers are based on compensating the magnetic field by a closed loop system. The MSV200 is used for the measurement of AC and DC voltages with high galvanic isolation between the voltage carrying conductor and output of the sensor. The voltage transducer can handle…